Skip to main content
NetApp Knowledge Base

NS224 shelf not shown when connect to a storage network X1148A card

Views:
400
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF A400
  • NS224 shelf
  • Storage Network X1148A 40G/100G Ethernet Controller CX5 PCIe card

Issue

  • NS224 shelf not detected when connected to a storage network X1148A card.
    • This can be noticed after an ONTAP upgrade to 9.8
  • The e4a/e4b ports on the X1148A linked up, but cannot see the disks behind them. Example:
::> system node run -node node_name -command sysconfig -a          
...                                                                
slot 4: 40G/100G Ethernet Controller CX5
        e5a MAC Address:    xx:xx:xx:xx:xx:xx (auto-100g_cr4-fd-up)
        e5b MAC Address:    xx:xx:xx:xx:xx:xx (auto-100g_cr4-fd-up)
        Device Type:        CX5 PSID(NAP0000001002)
        Firmware Version:   16.25.1020
        Part Number:        MCX516A-CCAT_C21
        Hardware Revision:  A2
        Serial Number:      MT1111111111
  • Port e4a/e4b can not be found from command ::> storage port show -node node1 -port-type ENET  

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.