Skip to main content
NetApp Knowledge Base

Fault LED is lighted during battery learning cycle

Views:
601
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • ONTAP 9
  • Service Processor (SP)

Issue

  • Fault LED of the front panel is lighted.
  • There is not error in "system controller service-event show"

Example:

cluster1::> system controller service-event show
This table is currently empty.

  • "events all" of SP shows bettery learning cycle is running.

Example:

Record 1192: Thu Nov  5 12:00:15 2020 [IPMI.notice]: 2502 | 02 | EVT: 0301ffff | Bat_Lrn_Active | Assertion Event, "State Asserted"

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.