Skip to main content
NetApp Knowledge Base

FAS2720 high CRC errors detected on port interconnect port e0a

Views:
272
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

 

FAS2720

Issue

High CRC errors detected on port interconnect port e0a.

 
example:

-- interface  e0e  (22 day, 13 hours, 13 minutes, 4 seconds) --

RECEIVE
 Total frames:        0  | Frames/second:       0  | Total bytes:         0
 Bytes/second:        0  | Total errors:        0  | Errors/minute:       0
 Total discards:      0  | Discards/minute:     0  | Multi/broadcast:     0
 Non-primary u/c:     0  | CRC errors:       1538  | Runt frames:         0
 Long frames:         0  | Length errors:       0  | Alignment errors:    0
 No buffer:           0  | Pause:               0  | Jumbo:               0
 Noproto:             0  | Bus overruns:        0  | LRO segments:        0
 LRO bytes:           0  | LRO6 segments:       0  | LRO6 bytes:          0
 Bad UDP cksum:       0  | Bad UDP6 cksum:      0  | Bad TCP cksum:       0
 Bad TCP6 cksum:      0  | Mcast v6 solicit:    0  | Lagg errors:         0
 Lacp errors:         0  | Lacp PDU errors:     0
TRANSMIT
 Total frames:        0  | Frames/second:       0  | Total bytes:         0
 Bytes/second:        0  | Total errors:        0  | Errors/minute:       0
 Total discards:      0  | Queue overflow:      0  | Multi/broadcast:     0
 Pause:               0  | Jumbo:               0  | Cfg Up to Downs:     0
 TSO segments:        0  | TSO bytes:           0  | TSO6 segments:       0
 TSO6 bytes:          0  | HW UDP cksums:       0  | HW UDP6 cksums:      0
 HW TCP cksums:       0  | HW TCP6 cksums:      0  | Mcast v6 solicit:    0
 Lagg drops:          0  | Lagg no buffer:      0  | Lagg no entries:     0

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device