Skip to main content
NetApp Knowledge Base

Data ONTAP's the Link Aggregation “ifgrp” does not work

Views:
452
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

ONTAP 9

Issue

  • Data ONTAP's the Link Aggregation “ifgrp” does not work after down one physical port of ifgrp.
  • The ifgrp is LACP mode with two physical ports.
  • The connected ports of the switch side follow the TR-3802.
  • Use the command network port modify to simulate the unplug the cable of the port.
    Example:
    ::> network port modify -node node01 -port e0a -up-admin false
  • Can not ping the IP address of the LIF lived on the ifgrp port.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
  • Was this article helpful?