Skip to main content
NetApp Knowledge Base

DIMM Missing Events in the BMC Logs Following a Reset From the BMC

Views:
162
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • AFF-A800

Issue

  • Following an SP/BMC based reset the following messages can be observed in the output of the 'bmc status -d' command:
Mar 16 17:29:37 BMC IPMIMain[1110]: [1110 : 1305 INFO]BBSP is 0x1f (BIOS Starting)... Previous BBSP value was: 0x2f
Mar 16 17:29:37 BMC IPMIMain[1110]: [1110 : 1305 INFO]Watchdog Disabled
Mar 16 17:29:37 BMC IPMIMain[1110]: [1110 : 1305 INFO]Restoring Thresholds and Hysteresis
Mar 16 17:29:37 BMC IPMIMain[1110]: [1110 : 1305 INFO]SP Based Restart
Mar 16 17:31:20 BMC hsam[1487]: HSAM OS(ontap):cmd(clr) FLD(/chassis-1/controller-b/dimm-1):fault(DIMM Missing)
Mar 16 17:31:20 BMC hsam[1487]: HSAM OS(ontap):cmd(clr) FLD(/chassis-1/controller-b/dimm-1):fault(Incorrect DIMM in slot)
Mar 16 17:31:20 BMC hsam[1487]: HSAM OS(ontap):cmd(clr) FLD(/chassis-1/controller-b/dimm-1):fault(DIMM Disabled)
Mar 16 17:31:20 BMC hsam[1487]: HSAM OS(ontap):cmd(clr) FLD(/chassis-1/controller-b/dimm-2):fault(DIMM Missing)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device