Cluster switches not showing new version after switch version upgrade
Applies to
- Cluster Interconnect Network Switch firmware update
- ONTAP 9
Issue
::> system cluster-switch show
(pre 9.8) or system switch ethernet show
(9.8 and later) reports the previous installed version. Example:
cluster::> system cluster-switch show
Switch Type Address Model
--------------------------- ------------------ ---------------- ---------------
clus-switch1(F0C12345678) cluster-network 192.168.10.2 NX3132V
Serial Number: F0C12345678
Is Monitored: true
Reason: None
Software Version: Cisco NX-OS(tm) nxos.7.0.3.I4.1.bin, Software (nxos), Version 7.0(3)I4(1), ...
Version Source: SNMP
clus-switch2(F0C87654321) cluster-network 192.168.10.3 NX3132V
Serial Number: F0C87654321
Is Monitored: true
Reason: None
Software Version: Cisco NX-OS(tm) nxos.7.0.3.I4.1.bin, Software (nxos), Version 7.0(3)I4(1), ...
Version Source: SNMP