Skip to main content
NetApp Knowledge Base

After upgrade FC latency increased 10 times

Views:
39
Visibility:
Public
Votes:
0
Category:
fc-series
Specialty:
san
Last Updated:

Applies to

ONTAP

Issue

  • After a node was rebooted during the upgrade process Fibre channel (FC) Host experiences extremely degraded IO performance with Brocade FC switches.
  • SRAM dump autosupport is generated  
Brocade:
porterrshow
- Shows error counters increasing
nsshow
- Shows no device registered on port
sfpshow
- RX Power is very low
 
ONTAP:
fct_tpd_thread_1: ems.engine.suppressed:debug]: Event 'fcp.io.status' suppressed 1 times in last 5 seconds.
fct_tpd_thread_1: fcp.io.status:debug]: STIO Adapter:1b, found hung cmd:0xfffff8093c5d12f0(state=10, flags=0x2, ctio_sent=2/3,RecvExAddr=0x212b, OX_ID=0x867, RX_ID=0xffff,SID=0x10800, Cmd[28], req_q_free:0)
fct_tpd_thread_1: scsitarget.fcp.dump:debug]: FCP target SRAM dump generated for adapter 1b, fct_tpd_check_hung_commands: Command termination hung. cmd:0xfffff8093c5d12f0 (state=0xa, flags=0x2,ctio_sent=2/3, RecvExAddr=0x212b, OX_ID=0x867, RX_ID=0xffff, SID=0x10800)
fct_tpd_thread_1: scsitarget.hwpfct.dump.saved:notice]: A dump for adapter 1b was stored in /etc/log/fctsli_1b/fct_fw_1b.dmp.gz.
fct_tpd_thread_1: callhome.fcp.sram.dump:error]: Call home for FCP SRAM DUMP.
fct_tpd_thread_1: scsitarget.fct.reset:notice]: Resetting Fibre Channel target adapter 1b.
Scan to view the article on your device
CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support