Skip to main content
NetApp Knowledge Base

Adding FAS500f nodes to existing cluster reports HA interconnect errors

Views:
153
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS500f
  • ONTAP 9.8
  • Expanding cluster
  • Cisco Nexus 3232C
  •  Reference Configuration File (RCF)

Issue

  • Attempting to add 2 new FAS500f nodes to an existing cluster
  • Nodes are able to be added to the cluster successfully
  • storage failover show output shows NVRAM log not synchronized, cannot reach partner over HA interconnect.

::> storage failover show
Takeover
Node           Partner        Possible State
Description
-------------- -------------- -------- -------------------------------------
cluster1-01        cluster1-02        true     Connected to cluster1-02
cluster1-02        cluster1-01        true     Connected to cluster1-01
cluster1-03        cluster1-04        true     Connected to cluster1-04
cluster1-04        cluster1-03        true     Connected to cluster1-03
cluster1-05        cluster1-06        false    Waiting for cluster1-06,
                                               Takeover is not
                                               possible: Storage failover
                                               interconnect error, NVRAM log not
                                               synchronized, Disk inventory not exchanged
cluster1-06        cluster1-05        false    Waiting for cluster1-05, Takeover is not
                                               possible: Storage failover
                                               interconnect error, NVRAM log not
                                               synchronized, Disk inventory not exchanged
6 entries were displayed.

 
  • EMS log shows
 
ALERT
cf.takeover.disabled: HA mode, but takeover of partner is disabled due to reason : HA interconnect error. Verify that the partner node is running and that the HA interconnect cabling is correct, if applicable. For further assistance, contact technical support.
 
  • Cabling confirmed to be correct

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.