"Active IQ Config Advisor Summary Report " reports "SAS Cabling checks"
Applies to
AFF-A700s
ONTAP 9.7P4
Issue
- "
Active IQ Config Advisor Summary Report" reports "SAS Cabling checks".
Example:
Description:SAS Cabling Checks
Severity :High Impact
Details :Three paths found from controller node name:******* to the stack on port 0a. Only multipath and quad-path configurations are supported.
"sysconfig -a"log shows quad-path is normal.
Example:
slot 0: SAS Host Adapter 0a (Avago Technologies SAS3008 rev. 2, SAS, <UP>)
Firmware rev: 13.00.00.00
NVDATA rev: 11.02.17.08
Base WWN: 5:00a098:00e3028:84
Phy State: [0] Enabled, 12.0 Gb/s
[1] Enabled, 12.0 Gb/s
[2] Enabled, 12.0 Gb/s
[3] Enabled, 12.0 Gb/s