Skip to main content
NetApp Knowledge Base

7-mode node performs an emergency shutdown and takeover occurs

Views:
158
Visibility:
Public
Votes:
0
Category:
data-ontap-8
Specialty:
7dot
Last Updated:

Applies to

  • 7-mode
  • Service Processor (SP)

Issue

  • 7-mode node has an unexpected shutdown
  • SP version is on a release below SP 1.6, 2.4, 3.2, 4.0, 5.0
  • SP has not been rebooted in more than 300 days
  • The following are examples of the event messages seen before the shutdown:
    env_mgr: monitor.temp.unreadable:info]: The controller temperature (In Flow Temp) is not readable.
    env_mgr: monitor.temp.unreadable:info]: The controller temperature (PCI Riser_R Temp) is not readable.
    env_mgr: monitor.temp.unreadable:info]: The controller temperature (Smart Bat Temp) is not readable.
    env_mgr: monitor.power.unreadable:info]: A power sensor 12V STBY in the controller module is not readable.
    env_mgr: monitor.power.unreadable:info]: A power sensor 12V STBY Curr in the controller module is not readable.
    env_mgr: monitor.chassisPowerSupply.degraded:notice]: Chassis power supply 1 is degraded: PSU1 Fan1 Speed is Unreadable
    env_mgr: monitor.chassisPowerSupply.degraded:notice]: Chassis power supply 1 is degraded: PSU1 Fan1 Fault is Unreadable
    monitor.shutdown.emergency:EMERGENCY]: Emergency shutdown: Environmental Reason Shutdown (Temperature critical)

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.