Skip to main content
NetApp Knowledge Base

system node restore-backup fails due to "scp /partner/etc/varfs.tgz root.../var/home/root/failed with error 1. " error

Views:
554
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS2620
  • FAS2720
  • FAS2750
  • ONTAP 9.1P9
  • ONTAP 9.7

Issue

  • The impaired node has been taken over by partner node.
  • Could not restore backup configuration from partner node when attempting to restore backup configuration from partner.
  • The following error occurs when executing the restore_backup from the partner node.

Example:

Cluster::*> system node restore-backup -node local -target-address <IP>
Start Restore Backup
mount_partner...success.
 
scp /partner/etc/varfs.tgz root@<target_IP>:
/var/home/root/failed with error 1.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.