Skip to main content
NetApp Knowledge Base

"sysconfig -r" doesn't display replaced disk after disk replacement in ADP configuration

Views:
367
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • Advanced Disk Partitioning (ADP)
  • ONTAP 9
  • AFF and FAS

Issue

  • After replacing the disk in the ADP environment, "sysconfig -r" doesn't display the replaced disk.
  • "sysconfig -a" shows the replaced disk.

Before replacement:

        00.2 : NETAPP   X343_SSKBE1T8A10 NA02 1713.5GB 520B/sect (WXXXXXG5)
        00.3 : NETAPP   X343_SSKBE1T8A10 NA02 1713.5GB 520B/sect (WXXXXXRF) (Failed) 
        00.4 : NETAPP   X343_SSKBE1T8A10 NA02 1713.5GB 520B/sect (WXXXXXET)

After replacement:

        00.2 : NETAPP   X343_SSKBE1T8A10 NA02 1713.5GB 520B/sect (WXXXXXG5)
        00.3 : NETAPP   X343_SSKBE1T8A10 NA02 1713.5GB 520B/sect (WXXXXXBE)   
        00.4 : NETAPP   X343_SSKBE1T8A10 NA02 1713.5GB 520B/sect (WXXXXXET)

  •   In storage disk show -partition-ownership outputs, Root and Data are blank, and  disk show -n is Not Owned status.

::*> storage disk show -partition-ownership
......

2.0.3    Container node-a        node-a        538164682   538164682
         Root      -                 -                 -           -
         Data      -                 -                 -           -           -                 - -

::*> disk show -n
  DISK       OWNER                    POOL   SERIAL NUMBER         HOME                    DR HOME 
------------ -------------            -----  -------------       -------------           -------------            
0b.00.3P1    Not Owned                  NONE   WBXXXXXXXX001       
0b.00.3P2    Not Owned                  NONE   WBXXXXXXXX002       

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.