Skip to main content
NetApp Knowledge Base

"show lldp neighbors" shows ONTAP e0M port as e0M or e0S

  1. Last updated
  2. Save as PDF
Views:
237
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9
  • AFF A800, AFF A700s, AFF A700, AFF A400, AFF A320, AFF A250, AFF A220, AFF A200, AFF C190
  • FAS9000, FAS8700, FAS8300, FAS8200, FAS500f, FAS27xx, FAS26xx
  • Cisco Catalyst Switch

Answer

  • e0M RJ45 port is linked to internal switch.
  • Internal switch is connected to SP and ONTAP and e0S is used for this internal communication.
  • Response for request from external switch will returned as both of e0M and e0S.  

Additional Information

additionalInformation_text

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.