Skip to main content
NetApp Knowledge Base

What does E-Series controller 7-segment rear display SE + 23 mean?

Views:
1,048
Visibility:
Public
Votes:
1
Category:
e-series-systems
Specialty:
esg
Last Updated:

 

Applies to

  • NetApp StorageGRID
  • NetApp E-Series
  • E2600
  • E2700
  • E2800 & EF280
  • E5400 & EF540
  • E5500 & EF550
  • E5600 & EF560
  • E5700 & EF570
  • SANtricity Rev 11.x

Answer

  • Controller rear 7-segment displays SE or 5E  refers to start up error
  • 23 refers to default boot device not found
  • A USB device is connected to the type A connector

Controller appears offline and will be unresponsive in the shell, unless additional actions of releasing the lockdown are used.
However, it likely will transition back to the condition after reboot

clipboard_e932f954986fe96950948df5c9cbda97b.png

 

Additional Information

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.