Skip to main content
We are redesigning the NetApp Knowledge Base site to make it easier to use and navigate. The new and improved site will be available the first week of October. Check out our video or read this KB article to know more about changes you’ll see on the site.
NetApp Knowledge Base

What does "Isolation of drive causing redundancy mismatch" mean

Views:
810
Visibility:
Public
Votes:
0
Category:
disk-drives
Specialty:
esg
Last Updated:

 

Applies to

E-Series

Answer

Isolation of drive causing redundancy mismatch is MEL event type 2046.

Isolation of drive causing redundancy mismatch is a data parity mismatch for which the controller firmware has been able to isolate the mismatch to a single drive. This is only possible for RAID 6 volume groups and Dynamic Disk Pools.

Typically if a drive has been isolated it can be replaced however we do want to perform troubleshooting first.

More Troubleshooting Details

Additional Information

N/A

 

******************************************************* *******************************************************