Skip to main content
NetApp Knowledge Base

What Firewall Port does SANtricity use?

Views:
195
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

 

Applies to

E-Series Controller Firmware 7.xx

Answer

When configuring a firewall to use SANtricity on the outside of the network on which the storage system is, the TCP port 2463 should be opened.

On the client-end of the connection, the port can be any, which is greater than 1023.

AutoSupport in 07.86 and later will use the same port, so no other port needs to be opened.