Skip to main content
NetApp Knowledge Base

SPM database reports an error when attempting to upgrade E-Series controller firmware

Views:
590
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

 

Applies to

E-Series Controller Firmware 7.xx

Issue

When preparing to upgrade E-Series Controller Firmware, the Firmware Upgrade utility reports the following error, which highlights a potential issue with the SPM (Storage Partition Manager) database.

[15.12.2011 16:21:38] [LSI2600_03_ISU_Kuhnenstr] [pre-upgrade tests] [pre-upgrade tests start]

Pre-upgrade tests started

[15.12.2011 16:21:39] [LSI2600_03_ISU_Kuhnenstr] [pre-upgrade tests] [check controller state]

Test passed - controller A

[15.12.2011 16:21:39] [LSI2600_03_ISU_Kuhnenstr] [pre-upgrade tests] [check controller state]

Test passed - controller B

[15.12.2011 16:21:40] [LSI2600_03_ISU_Kuhnenstr] [pre-upgrade tests] [check spm database]

Test passed - controller A

[15.12.2011 16:21:56] [LSI2600_03_ISU_Kuhnenstr] [pre-upgrade tests] [check spm database]

An error occurred while checking the spm database on controller B.

 

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.