Skip to main content
NetApp Knowledge Base

NetApp E-Series Battery charger in PowrOut state

Views:
401
Visibility:
Public
Votes:
1
Category:
e-series-santricity-os-controller-software
Specialty:
esg
Last Updated:

Applies to

NetApp E-Series and EF-Series

Issue

Battery charging state shows PowrOut in bidshow 255

Date       Time       State Cmd     MfgSts B_Mode Temp A_Volt A_Crnt MaxErr RelSOC RemCap FulCap C_Crnt C_Volt BatSts    
----------------------------------------------------------------------------------------------------------------------------
06/28/2020 05:58:06 PowrOut DISABAT 0x01F8 0xE001   26   7782      0      1     82   1027   1255   1000   7960 0x00C0
06/28/2020 05:58:21 PowrOut NONE    0x01F8 0xE001   26   7783      0      1     82   1027   1255   1000   7960 0x00C0
06/28/2020 05:58:36 PowrOut ENABAT  0x01F8 0xE001   26   7783      0      1     82   1027   1255   1000   7960 0x00C0
06/28/2020 05:58:47 PowrOut NONE    0x01F8 0xE001   26   7783      0      1     82   1027   1255   1000   7960 0x00C0 

 

Timer is seen inside the same output.

Bid Timers Slot Type      State    Interval   Remaining
-------------------------------------------------------------
Timer[0]:   0   Fault     Reset     0:00:00
Timer[1]:   0   Missing   Reset     0:00:00
Timer[2]:   0   PowerUp   Reset     0:00:00
Timer[3]:   0   Charging  Reset     0:00:00
Timer[4]:   0   Learning  Reset     0:00:00
Timer[5]:   0   LogTemp   Active    0:06:00    0:03:33
Timer[6]:   0   CmdTimer  Reset     0:00:00
Timer[7]:   0   SealTimer Reset     0:00:00
Timer[8]:   0   PowerOut  Active   24:00:00   23:45:50
Timer[9]:   0   Invalid   Reset     0:00:00

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.