Skip to main content
Effective December 3 - NetApp adopts Microsoft’s Business-to-Customer (B2C) identity management to simplify and provide secure access to NetApp resources. For accounts that did not pre-register (prior to Dec 3) access to your NetApp data may take up to 1 hour as your legacy NSS ID is synchronized to the new B2C identity. To learn more, Read the FAQ and Watch the video.
NetApp Knowledge Base

How to configure AutoSupport for E-Series systems

Views:
4,078
Visibility:
Public
Votes:
3
Category:
e-series-systems
Specialty:
esg
Last Updated:

Applies to

  • E-Series Controller Firmware 7.xx
  • SANtricity

Description

The E2800 and E5700 storage arrays include embedded ASUP functionality, rather than relying on an externally installed Event Monitor (agent provided with SANtricity Storage Manager) to configure and monitor AutoSupport (as does the E2700, E5600, and EF560 storage arrays). Because of the differences in the E2800 and E5700 storage arrays, there are different management methods for configuring AutoSupport across the two kinds of arrays. 

The procedure can also be found in our online documentation for the different platforms: E2600/E2700-E5500/E5600  and E2800-E5700.

This article contains a KB TV video that demonstrates the steps contained in this article to configure ASUP in legacy platforms using SANtricity Storage Manager.

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support