Skip to main content
NetApp Knowledge Base

E-series Thin volume repository becomes full even though Expansion policy set as Automatic

  1. Last updated
  2. Save as PDF
Views:
697
Visibility:
Public
Votes:
0
Category:
e-series-santricity-os-controller-software
Specialty:
esg
Last Updated:

Applies to

 

  • SANtricity OS 11.53.0
  • Thin Volumes

Issue

 

E-series Thin volume repository is full even though Expansion policy set as Automatic
Recovery Guru reports
Failure Entry 1: TPV_REPOSITORY_FULL-Recovery Failure Type Code: 430
Storage array: Array_name
Disk pool: Pool_name
Thin Volume: Vol_name
Status: Full
Reporting policy: Thin
Used repository capacity: 700.000 GB (100%)
Remaining repository capacity: 0.000 MB (0%)
 

Storage Array Profile on volume shows 

   Volume name:                      Vol_name
                                                                                      
      Volume status:                 Full                                             
      Thin provisioned:              Yes                                              
      Reporting policy:              Thin                                             
                                                                                      
      Virtual capacity:              5,000.000 GB                                     
      Maximum virtual capacity:      256.000 TB                                       
      Extended unique identifier:    Not Applicable                                   
      Subsystem ID (SSID):           16391                                            
      Associated disk pool:          Pool_name
      RAID level:                    Pool                                             
                                                                                      
      Repository for thin provisioning                                
         Name:                                     repos_0018         
         Capacity:                                 700.000 GB         
         Capacity consumed:                        700.000 GB (100%)  
         Volume capacity allocated to repository:  14%                
         Expansion policy:                         Automatic          
            Maximum capacity:                      5,000.000 GB       
         Utilization alert threshold:              85%     

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.