Skip to main content
NetApp Knowledge Base

E-Series drive operation cannot be performed because the drive is not in the correct state for the operation "Error 410"

Views:
1,119
Visibility:
Public
Votes:
1
Category:
e-series-santricity-management-software
Specialty:
esg
Last Updated:

Applies to

NetApp E-Series

Issue

SANtricity Array Manager reports the following disk conditions:

Status: Offline
Cause: Two volume groups reference same drive
Mode: Incompatible
 
After moving disks to new array, attempting to initialize results in:
 
Error 410 - A drive operation cannot be performed because the drive is not in the correct state for the operation.
 
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.