Skip to main content

NetApp_Insight_2020.png 

NetApp Knowledgebase

Data validation error on E-Series storage array during firmware upgrade

Views:
155
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

Applies to

Controller Platform: All Platforms
Controller Firmware: All Releases
SANtricity Version: All Version

Issue

During the pre-upgrade check, SANtricity reports one or more of the following error messages:

  • Data validation error: The storage array cannot be upgraded, as one or more host entries in Controller A did not match with those of Controller B.
  • The storage array cannot be upgraded, as the host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
  • [check spm database] An error occurred while checking the spm database on controller A.
  • [check internal data validity] Data validation error: You cannot upgrade the storage array until the problem is resolved. Contact your technical support representative to resolve this issue.

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support