Skip to main content
NetApp Knowledge Base

Controller rebooted due to ALT NMI panic

Views:
359
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

Applies to

  • E5600
  • E2800

Issue

Major-Event-Log reports Reboot Reason : CMGR: REBOOTALT_CMGR_SET_ALT_TO_FAILED

B:6/25/21 7:54:53 PM (02:54:53) 11236 400f Controller reset by its alternate - Tray 99, Slot A
----> Reboot Reason : VTM: REBOOTALT_VTM_UNTIL_FORCED_TRANSFER_COMPLETION
B:6/25/21 7:54:53 PM (02:54:53) 11235 400c Controller placed offline - Tray 99, Slot A
----> Reboot Reason : VTM: REBOOTALT_VTM_UNTIL_FORCED_TRANSFER_COMPLETION
B:6/25/21 7:54:39 PM (02:54:39) 11233 3700 Core dump has been captured - None
B:6/25/21 7:54:39 PM (02:54:39) 11232 2605 Start-of-day routine completed - Tray 99, Slot B

B:6/25/21 7:53:55 PM (02:53:55) 11224 6107 This controller's alternate is non-functional and is being held in reset - Tray 99, Slot A <--CRITICAL
B:6/25/21 7:53:55 PM (02:53:55) 11223 2829 Controller redundancy lost - Tray 99, Slot B <--CRITICAL
B:6/25/21 7:53:55 PM (02:53:55) 11222 400f Controller reset by its alternate - Tray 99, Slot A
----> Reboot Reason : CMGR: REBOOTALT_CMGR_SET_ALT_TO_FAILED
B:6/25/21 7:53:55 PM (02:53:55) 11221 400c Controller placed offline - Tray 99, Slot A
----> Reboot Reason : CMGR: REBOOTALT_CMGR_SET_ALT_TO_FAILED

B:6/25/21 7:49:53 PM (02:49:53) 11207 400f Controller reset by its alternate - Tray 99, Slot A
----> Reboot Reason : DCDM: REBOOT_DCDM_ALT_CORE_DUMP_TIMEOUT
B:6/25/21 7:46:30 PM (02:46:30) 11206 1712 Controller wide port has gone to optimal state - Tray 99, Slot A
----> SAS Port WWN: 50080e54786580bf, Attached SAS Port: 50080e5478764020, 1st Phy: 28, Active Phys: 4/4, Channel: 2, Level: 1, PortType: Connection to local ctlr
B:6/25/21 7:46:30 PM (02:46:30) 11205 1712 Controller wide port has gone to optimal state - Tray 99, Slot B
----> SAS Port WWN: 50080e54787640bf, Attached SAS Port: 50080e5478764000, 1st Phy: 24, Active Phys: 4/4, Channel: 3, Level: 1, PortType: Connection to local ctlr
B:6/25/21 7:46:30 PM (02:46:30) 11204 1712 Controller wide port has gone to optimal state - Tray 99, Slot B
----> SAS Port WWN: 50080e54787640bf, Attached SAS Port: 50080e5478764000, 1st Phy: 24, Active Phys: 4/4, Channel: 4, Level: 1, PortType: Connection to local ctlr
B:6/25/21 7:46:08 PM (02:46:08) 11203 2606 Start-of-day routine begun - Tray 99, Slot B

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.