Skip to main content
NetApp Knowledge Base

Unidentified/New Disk Error: Device qualification failure

Views:
301
Visibility:
Public
Votes:
0
Category:
data-ontap-7
Specialty:
hw
Last Updated:

Applies to

  • Data ONTAP operating in 7-Mode

Issue

If an unidentified HDD is inserted into the system, the storage controller's Event Management Systems (EMS) will log an error message similar to the one below:

  • Error message

Tue Oct 9 10:28:58 GMT [disk.dynamicqual.failure.occurred:error]: Device qualification failure occurred. Please refer to the qual_devices man page for corrective action. This problem must be corrected within 72 hour(s) to avoid a forced system shutdown. The following disk(s) remain unqualified:

  • Error messageThe following drive is not qualified by NetApp. For a list of qualified drives, please contact NetA
  • Error messageDevice qualification failure detected
  • Error messageDev Qual failure timeout expired. Halting system.

 

 

 

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support