Skip to main content

Coming soon...New Support-Specific categorization of Knowledge Articles in the NetApp Knowledge Base site to improve navigation, searchability and your self-service journey.

NetApp Knowledge Base

Volume Efficiency (deduplication) not completing for auto efficiency policy when changelog usage is over 20 percent

Last Updated:

Applies to

  • Volume with efficiency policy set to auto
  • Deduplication changelog over the default threshold of 20%


Volume efficiency (deduplication) operations run but do not complete for volumes with the auto efficiency policy and changelog usage over the default threshold of 20%.

Automatic deduplication should run once changelog is over 20% full.

A volume efficiency show command gives output similar to the following:

Cluster01::> volume efficiency show -vserver svm1 -volume vol1 -instance

                                     Vserver Name: svm1
                                      Volume Name: vol1
                                      Volume Path: /vol/vol1
                                            State: Enabled
                                           Status: Active
                                         Progress: Fingerprint is being recovered from aggregate (0% complete)
                                             Type: Regular
                                         Schedule: -
                           Efficiency Policy Name: auto
                           Efficiency Policy UUID: ffffffff-ffff-ffff-ffff-ffffffffffff
                             Last Operation State: Success
                     Last Success Operation Begin: Tue May 30 22:58:25 2017
                       Last Success Operation End: Tue May 30 22:58:25 2017
                             Last Operation Begin: Wed Mar 18 15:15:16 2020
                               Last Operation End: Wed Mar 18 15:20:00 2020
                              Last Operation Size: 0B
                             Last Operation Error: -
                              Operation Frequency: Once approxmiately every 5 min(s) and 18 sec(s)
                                  Changelog Usage: 91%
                                   Changelog Size: 314.9GB


Notice no errors are being reported, the changelog usage is 91% and that the operation is being executed very frequently, but doing nothing.


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device