Skip to main content

NetApp_Insight_2020.png 

NetApp Knowledgebase

Unable to unjoin a node while performing a Controller HW Upgrade

Views:
67
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

ONTAP 9

Description

When trying to unjoin a node while performing an Hardware Head Upgrade procedure the following errors are received:
::*> cluster unjoin -node naXXXXX-02

Failed to delete failover-group "e0M" because it is still in use by the following LIFs: <vserver: naXXXXX, LIF: cluster_mgmt>.

Reassign these LIFs to use a new failover-group, then retry the cluster unjoin operation.


::*> network interface delete -vserver Cluster -lif naXXXXX-02_clus1
Warning: Deleting a cluster LIF can disrupt the Cluster network. Are you sure you want to continue? {y|n}: y

Error: command failed: LIF "naXXXXX-02_clus1" cannot be removed because it is required to maintain quorum on node "naXXXXX-02".


::*> network interface modify -vserver svm-test1 -lif svm-test1_lif1 -home-node naXXXXX -home-port a0a-20

Warning: The configured failover-group has no valid failover targets for the LIF's failover-policy. To view the failover targets for a LIF, use the "network interface show -failover" command.


::*> network interface failover-groups remove-targets -vserver naXXXX -failover-group 10.1.32.0/24 -targets naXXXXX-02:e0M

Error: command failed: Failover group "10.1.32.0/24" cannot be modified because it is automatically generated by broadcast domain "10.1.32.0/24".

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support