Skip to main content
NetApp Knowledge Base

Storage Pool creation fails with error "Disk <disk> is not a spare disk"

Views:
182
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

  • FAS8200
  • ONTAP 9.4P6

Issue

  1. Storage Pool creation fails reporting one of the selected disk is not a spare

cluster::> storage pool create -storage-pool SP1 -nodes node1,node2 -disk-count 3 -simulate true
Error: command failed: Disk "8.41.1" is not a spare disk.

  1. storage disk show output for that disk shows two different drives

cluster::> storage disk show -disk 8.41.*
                     Usable           Disk    Container   Container
Disk                   Size Shelf Bay Type    Type        Name      Owner
---------------- ---------- ----- --- ------- ----------- --------- --------
8.41.1              836.9GB    41   1 SAS     aggregate   aggr1     node1
8.41.1              372.4GB    41   1 SSD     spare       Pool0     node1

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device