Skip to main content
NetApp Knowledge Base

SVMDR initialization fails with error "not supported because the effective cluster version is not Data ONTAP 8.3.1"

Views:
547
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
legacy
Last Updated:

Applies to

  • ONTAP 9.4
  • ONTAP 9.3
  • ONTAP 9.2
  • ONTAP 9.1
  • ONTAP 9
  • Clustered Data ONTAP 8.3

Issue

SVMDR initialization fails with the following error:

Failed to apply the source Vserver configuration. Reason: Apply failed for Object: cifs_server_security Method: baseline.

Reason: kerberos-kdc-timeout is not supported because the effective cluster version is not Data ONTAP 8.3.1 or later.

Failed to apply the source Vserver configuration.

Reason: Apply failed for Object: ddns_byname Method: baseline. Reason: This operation requires an effective cluster version of Data ONTAP 8.3.1 or later.

The capabilities mentioned on the error are enabled on the source but not in the destination:

Source::*> capability show -capability cifs.ontap.8*
(system capability show)

Node            Capability                   Enabled
-------------- ----------------------------- -------
Node1           cifs.ontap.8.3.1             true
Node2           cifs.ontap.8.3.1             true

 

Destination::*> capability show -capability cifs.ontap.8*
(system capability show)

 

Node             Capability                   Enabled
-------------- ------------------------------ -------
Node1            cifs.ontap.8.3.1             false
Node2            cifs.ontap.8.3.1             false

 

Source::*> capability show -node * -capability *ddns*
(system capability show)

 

Node             Capability                   Enabled
-------------- ------------------------------ -------
Node1            nameservices.ddns            true
Node2            nameservices.ddns            true

 

Destination::*> capability show -node * -capability *ddns*
(system capability show)

 

Node             Capability                   Enabled
-------------- ------------------------------ -------
Node1            nameservices.ddns            false
Node2            nameservices.ddns            false

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.