Skip to main content
NetApp Knowledge Base

Unified Manager reports Aggregate is Overcommitted, How to verify in ONTAP

Views:
4,466
Visibility:
Public
Votes:
5
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9.1 and later
  • OnCommand Unified Manager
  • OnCommand Insight
  • Active IQ Unified Manager

Description

  • Unified Manager notification received.

Risk          - Aggregate Overcommitted
Impact Area   - Protection
Severity      - Error
State         - New
Source        - Fas8200-01: AGG_01
Cluster Name  - Fas8200
Cluster FQDN  - 10.10.10.10
Trigger Condition - The overcommitted threshold set at 100% is breached. 121.07 TB (222.49%) of 54.42 TB is committed. 32.39 TB (59.52%) is used.
Description   - This alert will trigger when the aggregate has had more space allocated to volumes than the amount of usable space in the aggregate (or is close to using more space)

  • To calculate over commitment;
    • Type DP volumes consider volume total size
    • Type RW volumes consider Maximum Autosize (If -autosize-mode is off, use the total volume size)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.