Skip to main content
NetApp Knowledge Base

ONTAP System Manager displays "The system could not connect to the server because of network issues"

Views:
2,057
Visibility:
Public
Votes:
0
Category:
ontap-system-manager
Specialty:
om
Last Updated:

Applies to

  • ONTAP 9.7
  • ONTAP System Manager
    • New Experience web user interface

Issue

Unable to browse to Network | Ethernet Ports in ONTAP System Manager while using the New Experience web user interface.

Error: The system could not connect to the server because of network issues. Wait for some time and then refresh the browser.

Unable to browse to Network Ethernet Ports

  • Switching ONTAP System Manager back to Classic View allows to open the tab normally.

After head swap the ports e0a and e0b are seen in the network port show  output  as cluster ports, but i am not able to modify them

 
::> net port modify -node node_02 -port e0b -ipspace Default
 
(network port modify)
Warning: Changes to a cluster port can affect the health of the Cluster. Are you sure you want to continue? {y|n}: y

 Error: command failed: Failed to modify the admin state of port e0b. Error: The port "e0b" does not exist in the stack.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.