Skip to main content

Coming soon...New Support-Specific categorization of Knowledge Articles in the NetApp Knowledge Base site to improve navigation, searchability and your self-service journey.

NetApp Knowledge Base

Node goes down with panic "giveback or arl hung in replication_engine while doing SENDHOME_DOING_PRECOMMIT in SK process"

Views:
83
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9
  • FAS/AFF

Issue

Node goes down reporting the following software panic string followed by a coredump:
 
PANIC: giveback or arl hung in replication_engine while doing SENDHOME_DOING_PRECOMMIT in SK process sendhome_hang_detector
on release 9.8P12 (C) on Sun  Thu May 12 20:07:27 EDT 2022
compile flags: x86_64.optimize
HA: current time (in sk_msecs) 2403764 (in sk_cycles) 6227546366396
DUMPCORE: START
Dumping to disks: 0d.00.15P2
coredump: Using block 461193217 instead of block 461193216 as the sparecore abort block
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
...........................................................................................................................
DUMPCORE: END -- coredump written
coredump: compression ms 315347 compressions 209628 bytes in 566686916608 bytes out 53045401980 ratio 1068%
comp BW 1713MB/s
coredump: write ms 51529 write count 15376 write bytes 53047083008 write BW 89MB/s
coredump: total ms 570912 chunks of all zeroes 23715

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device