Skip to main content
NetApp Knowledge Base

LACP ifgrp with 40G ports fails to send traffic after upgrade to ONTAP 9.8

  1. Last updated
  2. Save as PDF
Views:
1,122
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas
Last Updated:

Applies to

  • ONTAP 9.8
  • LACP ifgrp
  • 40 GbE member ports with media type containing "40g_lm4"

Issue

  • LACP ifgrp fails to send traffic after an upgrade to ONTAP 9.8
  • This only applies to LACP ifgrps with 40 GbE member ports using long-range Multimode transceivers 
    • The member ports will have a media type containing the string "40g_lm4"
    • ::> node run -node <node> sysconfig -a
(truncated...)    
    slot 1: 10/40 Gigabit Ethernet Controller XL710 QSFP+
        e1a MAC Address:    aa:bb:cc:dd:ee:fe (auto-40g_lm4-fd-up)
            QSFP Vendor:         CISCO-AVAGO     
            QSFP Part Number:    AFBR-79EBPZ-CS2 
            QSFP Serial Number:  AVF87654321    
        e1e MAC Address:    aa:bb:cc:dd:ee:ff (auto-40g_lm4-fd-up)
            QSFP Vendor:         CISCO-AVAGO     
            QSFP Part Number:    AFBR-79EBPZ-CS2 
            QSFP Serial Number:  AVF12345678

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.