Skip to main content
NetApp Knowledge Base

Is it possible to administratively shutdown port in OnCommand System Manager 8.3 and above ?

Views:
2,672
Visibility:
Public
Votes:
3
Category:
ontap-9
Specialty:
om
Last Updated:

 

Applies to

  •  OnCommand System Manager  8.3-9.7
  •  ONTAP 9 

Answer

No. It is not possible to administratively shutdown port in OnCommand System Manager 8.3 and above.

Below you can find steps and screenshot on which is displayed all available setting that you can change in OnCommand System Manager on a port level.
Link to the documentation
  1. Click Network > Ethernet Ports
  2. Select the physical port, and then click Edit
  3. In the Edit Ethernet Port dialog box, modify the duplex mode and speed settings to either manual or automatic
  4. Click Edit 

1087098_1.jpg

In order to administratively shutdown port please use command-line-interface
Link to the documentation
 

Example:

cluster1::> network port modify -node node0 -port e0a -autonegotiate-admin false -duplex-admin half -speed-admin 100 -up-admin false

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.