Skip to main content
NetApp Knowledge Base

Incorrect "ifstat" values are displayed for the Transmit-Total errors counter for a CNA card

Views:
1,279
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas
Last Updated:

Applies to

  • ONTAP 9.2P4
  • QLogic Converged Network Adapter (CNA) 8324

Issue

  • Event logs reports the following errors

Example:

4/18/2019 11:35:16  FAS2620_0125     ALERT         vifmgr.cluscheck.crcerrors: Port e0c on node FAS2620_0125 is reporting a high number of observed hardware errors, possibly CRC errors.
 4/18/2019 10:31:05  FAS2620_0126     ALERT         vifmgr.cluscheck.crcerrors: Port e0c on node FAS2620_0126 is reporting a high number of observed hardware errors, possibly CRC errors.
 4/18/2019 10:30:16  FAS2620_0125     ALERT         vifmgr.cluscheck.crcerrors: Port e0c on node FAS2620_0125 is reporting a high number of observed hardware errors, possibly CRC errors.
 4/18/2019 09:26:05  FAS2620_0126     ALERT         vifmgr.cluscheck.crcerrors: Port e0c on node FAS2620_0126 is reporting a high number of observed hardware errors, possibly CRC errors.

  • The"ifstat -a"shows high Transmit-Total errors counter

Example:

-- interface  e0c  (260 days, 7 hours, 2 minutes, 13 seconds) --

RECEIVE
 Total frames:    28041m | Frames/second:    1247  | Total bytes:     31031g
 Bytes/second:     1379k | Total errors:        0  | Errors/minute:       0 
 Total discards:      0  | Discards/minute:     0  | Multi/broadcast:   254m
 Non-primary u/c: 27985m | CRC errors:          0  | Runt frames:         0 
 Fragment:            0  | Long frames:         0  | Jabber:              0 
 Alignment errors:    0  | No buffer:           0  | Xon:                 0 
 Xoff:                0  | Jumbo:               0  | Noproto:             0 
 Error symbol:        0  | Illegal symbol:      0  | Bus overruns:        0 
 LRO segments:    18989m | LRO bytes:       30180g | LRO6 segments:       0 
 LRO6 bytes:          0  | Bad UDP cksum:       0  | Bad UDP6 cksum:      0 
 Bad TCP cksum:       0  | Bad TCP6 cksum:      0  | Mcast v6 solicit:    0 
TRANSMIT
 Total frames:    16313m | Frames/second:     725  | Total bytes:         0 
 Bytes/second:        0  | Total errors:    38007m | Errors/minute:     101k
 Multi/broadcast:   788k | Max collisions:      0  | Single collision:    0 
 Multi collisions:    0  | Late collisions:     0  | Xon:                 0 
 Xoff:                0  | Jumbo:               0  | Cfg Up to Downs:     0 
 TSO non-TCP drop:    0  | Split hdr drop:      0  | Timeout:             0 
 TSO segments:     5957m | TSO bytes:       39976g | TSO6 segments:       0 
 TSO6 bytes:          0  | HW UDP cksums:       0  | HW UDP6 cksums:      0 
 HW TCP cksums:       0  | HW TCP6 cksums:      0  | Mcast v6 solicit:    0 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.