How to change the IP space or broadcast domain on a port

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 951

Visibility:: Public

Votes:: 1

Category:: ontap-9

Specialty:: network

Last Updated:

Applies to

ONTAP 9

Description

By default, the network ports on the node have the following roles:

::> network port show Auto-Negot Duplex Speed (Mbps) Node Port Role Link MTU Admin/Oper Admin/Oper Admin/Oper ----------- ------ -------- ----- ------- ----------- ----------- ------------ cluster1-01 e0a cluster up 9000 true/true full/full 1000/1000 e0b cluster up 9000 true/true full/full 1000/1000 e0c data up 1500 true/true full/full 1000/1000 e0d data up 1500 true/true full/full 1000/1000

However, one of the nodes do not show the roles correctly:

::> net port show -node cluster1-03 (network port show) Speed (Mbps) Node Port IPspace Broadcast Domain Link MTU Admin/Oper ------------ ------ -------- ---------------- ----- ------ ------------ cluster1-03 e0a Cluster Cluster up 9000 auto/10000 e0b Default Default up 1500 auto/10000 e0c Cluster Cluster up 9000 auto/10000 e0d Default Default up 1500 auto/10000

The following error appears when attempting to change the IPspace and broadcast domain of port e0b:
::> net port modify -node cluster1-03 -port e0b -ipspace Cluster (network port modify)

Error: command failed: Cannot directly modify the IPspace on this port; instead add it to the appropriate broadcast domain in the desired IPspace.