Skip to main content
NetApp Knowledge Base

How are FlexGroup Inodes calculated after increasing the limits?

Views:
1,753
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

ONTAP 9.2
ONTAP 9.3
ONTAP 9.1

Description

The inode count limits are given per constituent volume as shown in table 9 (page 45) from the NetApp FlexGroup Volume Best Practices and Implementation Guide
This table details the default inode counts based on each constituent volume size

Flexgroups.jpg

The table shows that for volume size greater than 1TB the default inode count limit for each volume is 21,251,126 inodes
To obtain the current inode count the command df -i can be run from the nodeshell of each node in the cluster

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.