Skip to main content
NetApp Knowledge Base

Giveback is canceled with the message "Run the storage failover show-giveback command to check giveback status"

  1. Last updated
  2. Save as PDF
Views:
1,552
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

Applies to

  • FAS and AFF Platform
  • ONTAP 9

Issue

  • Proceed giveback from node-1 to node-2, an event occurs and cannot giveback. 

Example:

Cluster::> storage failover giveback -ofnode node-2

Info: Run the storage failover show-giveback command to check giveback status. 

Cluster::> storage a failover show
                              Takeover          
Node Partner        Possible State Description  
-------------- -------------- -------- -------------------------------------
node-1              node-2  false    Previous giveback failed in module:
                              autosupport. Auto giveback will be initiated in 283 seconds
node-2              node-1  -         Waiting for giveback
 
2 entries were displayed.

  • The following message is output in the "event log show" When an event occurred.

Example:

2/8/2021 17:31:29   node-1 ALERT cf.rsrc.givebackVeto: Failover monitor: autosupport: giveback canceled due to active state.

  • Checking the "autosupport-history.xml" status of the target time in the item of "Last Error" column from AutoSupport, confirm the following message.

Example:

"AutoSupport collection is delayed due to DBLADE delay request due to takeover/giveback. AutoSupport collection will be retried."

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.