Skip to main content
NetApp Knowledge Base

Failure Error Message: vol autosize: Operation not supported on FlexGroups

Views:
173
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

 

Applies to

ONTAP 9.2 and below

FlexGroup

Answer

Autosize for FlexGroup is available from ONTAP 9.3 and above only. Any releases prior to that will fail as below:
 
cluster01::> volume autosize -vserver svm-01 -volume my_flexgroup
vol autosize: Operation not supported on FlexGroups.

Additional Information

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.