Skip to main content
We are redesigning the NetApp Knowledge Base site to make it easier to use and navigate. The new and improved site will be available the first week of October. Check out our video or read this KB article to know more about changes you’ll see on the site.
NetApp Knowledge Base

Does ONTAP have a single counter manager to track all the CIFS SMB versions used by the NAS clients

Views:
181
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
cifs
Last Updated:

Applies to

  • All FAS/AFF systems connected to CIFS clients  which supports all versions of SMB.

Answer

  • Currently there is no way to track the SMB  client versions using counter manager statistics.
  • The following (diag) commands can be used to track respective SMB version connections from the CIFS object. 
    • Although these counts are not accurate for SMB version 1. 
::*> statistics show-periodic -object cifs:vserver -counter smb3_connections_count -instance <vserver_name>
::*> statistics show-periodic -object cifs:vserver -counter smb2_1_connections_count -instance <vserver_name>
::*> statistics show-periodic -object cifs:vserver -counter smb2_connections_count -instance <vserver_name>
::*> statistics show-periodic -object cifs:vserver -counter smb1_connections_count -instance <vserver_name>
  • The SMB protocol negotiates protocol-specific options using the SMB_COM_NEGOTIATE request and response messages.
    • The client will send its supported version and options to the CIFS server. '
    • The server will respond with the highest commonly supported version.   
  • This SMB_COM_NEGOTIATE is counted as a connection count for SMB1 , whereas the client might have actually negotiated and connected via a higher dialect.
    • Hence , there is a discrepancy in those values with the actual SMB1 connection count.
    • No further enhancements are done for SMB1 counter manager as Microsoft has announced that it is deprecating SMB 1 and will be disabling it, by default, in a future version of Windows Server.
  • The only way to track clients still using SMB 1 is by referencing the following counter, which tracks the (SMB_COM_NEGOTIATE) from any client which supports SMB1.
::*> statistics show-periodic -object smb1 -counter established_sessions -instance <vserver_name>
  • However, this counter is only available for SMB1.
    • All other SMB versions SMB(2/2.1/3) are aggregated under SMB2.
    • There is no current mechanism to track established sessions for SMB2 ,SMB2.1 and SMB3 separately.

Additional Information

 

 

******************************************************* *******************************************************