Skip to main content
NetApp Knowledge Base

SYSTEM_BOOT_FAILED (POST failed) - AutoSupport message

Views:
1,176
Visibility:
Public
Votes:
0
Category:
data-ontap-7
Specialty:
7dot
Last Updated:

Applies to

  • Data ONTAP 8.2
  • System Alert from RLM of filer1 (SYSTEM_BOOT_FAILED (POST failed)) CRITICAL
  • System Alert from SP of filer1 (SYSTEM_BOOT_FAILED (POST failed)) CRITICAL
  • [Boot Loader.critical]: Abort Autoboot due to BIOS POST failure. Additional data:
  • [Trap Event.critical]: hwassist post_error

Event Summary

The AutoSupport message SYSTEM BOOT FAILED indicates that a system has failed to complete POST (Power On Self Test), and currently, is not online serving data.

Validate

additionalInformation_text

Resolution

This AutoSupport was generated by the Remote Lan Module (RLM) and might be an issue with the RLM or with the storage controller. To resolve this issue, the steps below should be followed during the initial troubleshooting. If the cause is not determined with the action plan below, contact NetApp Technical Support for further assistance. 

Perform the following:

  1. Try connecting to the appliance through RLM or SP.
  2. Review the RLM/SP AutoSupport searching for errors that might indicate why the appliance could not boot.
  3. If maintenance is in progress, review the logs of the previous session to see why CFE failed.
  4. Try booting Data ONTAP manually.
  5. If there seems to be an issue with RLM/SP or this e-mail message is generated without a cause, connect to the RLM/SP CLI (logging the output), run the following commands, and contact NetApp Technical Support for further assistance:

Service Processor

“events all”

RLM: 

  • priv set advanced
  • rlm log debug
  • priv set   
     

For more information, see KB How to troubleshoot unexplained takeovers or reboots

If you require assistance with troubleshooting the POST failure, or any further assistance, contact NetApp Technical Support.

Additional Information

additionalInformation_text

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.