Skip to main content
NetApp Knowledgebase

AutoSupport Message: Chassis Power Degraded

Views:
623
Visibility:
Public
Votes:
1
Category:
data-ontap-7
Specialty:
hw
Last Updated:

Applies to

Data ONTAP 7 and earlier 

Issue

CHSPWR:System Notification from Filer1 (CHASSIS POWER DEGRADED: PSU1 12V is  failed. PSU1 5V is  failed. PSU1 3V is  failed)

System Notification from Filer1 (CHASSIS POWER DEGRADED: PSU1 12V is  failed. PSU1 5V is  failed. PSU1 3V is  failed)

[Filer1: monitor.chassisPowerSupply.degraded:notice]: Chassis power supply 1 is degraded: PSU 1 AC Failed
[Filer1: monitor.chassisPowerSupply.degraded:notice]: Chassis power supply 1 is degraded: PSU 1 12V Failed
[Filer1: monitor.chassisPowerSupply.degraded:notice]: Chassis power supply 1 is degraded: PSU 1 5V Failed
[Filer1: monitor.chassisPower.degraded:notice]: Chassis power is degraded:

AutoSupport message: Chassis Power Degraded

The following AutoSupport messages are sent:

SHELF_FAULT
CHASSIS POWER SUPPLY FAIL
CHASSIS POWER SUPPLY DEGRADED

CHSPWR:System Notification from Filer1 (CHASSIS POWER DEGRADED:  sensor RTC Battery) WARNING

Troubleshooting:

comprehensive mb test failed
ERROR ENV013858: sensor RTC Battery failed;
                 sensor failed to return to normal
                 measured: 2633mV; upperLimit: 3996mV; lowerLimit: 0mV;

FSE bent clip which holds battery to fasten battery, and ran diagnostics again, this time successfully:

(RTC Battery) ........... 2800< 3072 mV <3500

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support