Skip to main content
NetApp Knowledge Base

What are the bandwidth and latency requirements between management node and cluster for Element upgrade?

Views:
57
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

Applies to

  • NetApp Element software
  • NetApp SolidFire
  • NetApp HCI
  • Element management node (mNode)

Answer

The recommended bandwidth between mNode and the SolidFire storage cluster is 30Mbit/s bandwidth with maximum 1 second latency

Additional Information

To calculate minimum bandwidth required for remote cluster upgrade to work consider following:

  • By default there is a 1800 second timeout when staging RTFI (Return To Factory Image) images from the mNode to the storage nodes
  • RTFI ISO image is approximately 5.3 GB

5.3GB / 1800 sec = 5300MB / 1800 sec = 3 MB/sec = 30Mbit/s

  • In terms of latency there are:
    • 1 sec connection timeouts
    • 3 sec API timeouts

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.