Skip to main content
NetApp Knowledge Base

E-Series SANtricity Web Server 422 error when performing different management tasks

Views:
2,507
Visibility:
Public
Votes:
2
Category:
e-series-santricity-web-services-proxy
Specialty:
esg
Last Updated:

Applies to

  • NetApp E-Series E2800, E5700 and associated EF-series platforms
  • NetApp StorageGRID Appliances: SG5700, SG6060 and SGF6024

Issue

SANtricity may report the following error message in between any of the other below errors:

Data could not be loaded from the storage array. One possible cause is the object on which you were performing the operation no longer exists. Other possible causes include network issues, inability to communicate with the controller, or loss of power to the storage array. Check these causes and then retry the operation.

During different management tasks the following errors can be observed

  • During Drive Firmware upgrade - Error accessing the temporary drive firmware directory. There may be a file permission error or the device is full. (Web Server 422)

Drive Firmware upgrade

  • Collect support data - Unable to write to the specified file support-data.7z. Please make sure the specified locations is accessible, the disk is not full and if the file name entered is valid. (Web Server 422)
  • Errors during API call execution - Code 422 - No space left on device:
  • Updates on certificates - Failed to reset array management certificates on Controller X because: The specified file "keystore" could not be delete (Web Server 422):

Updates on certificates

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.