Skip to main content
NetApp Knowledge Base

SANtricity System Manager reports "Data could not be loaded from the storage array"

  1. Last updated
  2. Save as PDF
Views:
1,047
Visibility:
Public
Votes:
2
Category:
e-series-santricity-management-software
Specialty:
nas
Last Updated:

Applies to

  • NetApp E-Series E2800
  • NetApp SANtricity OS 11.50 or above
  • Windows Server 2016

Issue

When trying to access SANtricity System Manager, the following error(s) appear intermittently:

"Data could not be loaded from the storage array. One possible cause is the object on which you are trying to perform the operation no longer exist. Other possible causes include network issues, inability to communicate withe the controller, or loss of power to the storage array. Check these causes and then retry the operation."

"There was a problem updating the display with the latest information, Possible causes include network issues, inability to communicate withe the controller, or loss of power to the storage array. Check these causes and then retry the operation."

clipboard_ec6323b4ec0bbeaa5235376313651798b.png

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.