Skip to main content
NetApp Knowledge Base

Is it safe to offline or delete MDV_CRS volumes?

Views:
3,452
Visibility:
Public
Votes:
2
Category:
snapmirror
Specialty:
dp
Last Updated:

Applies to

  • ONTAP 9
  • SVMDR
  • MetroCluster

Answer

  • No; offlining or deleting MDV_CRS volumes can result in all SVM-DR or MetroCluster relationships failing to and from the cluster in question. Offlining or deleting MDV_CRS volumes can result in failures to configure and utilize the local cluster. This includes failures in modifying volume properties and even client-side protocol failures and outages.
  • MDV_CRS volumes are used for the Configuration Replication Service which is used in MetroCluster and SVM-DR (vserver disaster recovery) configurations.
  • MDV_CRS volumes are created and managed by ONTAP and cannot be created manually. It may be impossible to online an MDV_CRS volume which has been made offline or to re-create a deleted MDV_CRS volume.

 

  • If you have MDV_CRS volumes blocking operations, causing other issues, or if you have inadvertently deleted an MDV_CRS volume, 

    Please contact NetApp Technical Support or log into the NetApp Support Site to create a case. Reference this article for assistance with the solution. 

    • The solution requires Diagnostic-level recovery. 
    • The use of Diagnostic commands and recovery steps is potentially disruptive and should only be used with guidance from NetApp Support. 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.