Skip to main content
NetApp Knowledge Base

7mode SM reports error message: Cannot connect to source storage system

  1. Last updated
  2. Save as PDF
Views:
604
Visibility:
Public
Votes:
1
Category:
snapmirror
Specialty:
dp
Last Updated:

​ ​ ​  

Applies to

Product Model: FAS3210-R5
OS: Data ONTAP 8.2.1 7-Mode
Category 2: SnapMirror

This article applies to any SnapMirror case that reports the following error message:
cannot connect to source storage system

Answer

All known causes of this error involve either name resolution or networking misconfiguration, specifically routing, or firewalls.

Name Resolution:

  1. Run traceroute commands to perform a test name resolution with the storage system ping. Even if the path is blocked, the name resolution will work.
  2. When testing name resolution, ensure the name is entered exactly as in the SnapMirror/SnapVault command.
  3. Check for the capitalization, spelling, and FQDN.
  4. Run the getXXbyYY gethostbyname_r <hostname> command to check the DNS entry.
  5. To ensure hostname authentication is correct add an entry into /etc/hosts on both sides.
  6. If the ping resolves as expected but traceroute does not, verify there is a blank line at the end of /etc/hosts.

Networking:

Additional Information

  • You can also go into the 7-mode filer and go to options snapmirror.access and confirm that access is set to all or *
    • ::> options snapmirror.access all

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.