Skip to main content
NetApp Knowledge Base

Unable to assign new drive(s)

Views:
955
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • ONTAP 9
  • MetroCluster IP

Issue

After inserting new drives into the system they show up as 'unknown'
Example:
Cluster_A::> storage disk show -container-type unknown
                     Usable           Disk    Container
Container
Disk                   Size Shelf Bay Type    Type        Name      Owner
---------------- ---------- ----- --- ------- ----------- --------- --------
1.20.3                    -    20   3 SSD     unknown     -
2.30.3                    -    30   3 SSD     unknown     -
2 entries were displayed.
 
When attempting to view the partitions no information can be displayed
Example:
 
Cluster_A::*> storage disk partition show -partition *1.20.3*
                          Usable  Container     Container
Partition                 Size    Type          Name              Owner
------------------------- ------- ------------- ----------------- -----------------
1.20.3.P1                 -       -             -                 -
1.20.3.P2                 -       -             -                 -
1.20.3.P3                 -       -             -                 -
 
After removing ownership of the partitions and assigning them to the correct node, they add a foreign aggregate to the system
Example:
 
Cluster_A-01> aggr status
aggr0(1) failed          raid_dp, aggr         diskroot, raidtype=raid_dp, raidsize=24, 
                         foreign               raid_lost_write=on, resyncsnaptime=5, 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.