Skip to main content
NetApp Knowledge Base

There are no ports on node connected to fabric

Views:
103
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • MetroCluster
  • ONTAP 9
  • FC traffic being served on the front-end

Issue

  • Errors are reported in the event log show output
    Example:
    Wed Jun 01 12:57:52 +0200 [ClusterA-n01: mgwd: san.NoConnectedFCport.prim:error]: The source cluster FC port 0h that is 
    hosting FC LIF FC_LIF_1 on primary Vserver FC_SVM_1 is not connected to any fabric.
    
  • metrocluster check lif show displays a number of FC LIFs with errors
    Example:
    Cluster             Vserver     LIF          Check                  Result 
    ------------------- ----------- -----------  ---------------------- -------
    ClusterA            FC_SVM_1    FC_LIF_1                                   
                                                 lif-placed-on-dr-node  ok     
                                                 port-selection         warning

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.