Skip to main content
If you missed the pre-registration for NetApp MS Azure AD B2C Go Live, when you log in, the new login prompt will offer the option to register. Please note that access to your NetApp data may take up to 1 hour. Need assistance? Complete this form and select “Registration Issue” as the Feedback Category. 
NetApp Knowledge Base

Switchback failing due "disks were left behind during switchback"

Views:
20
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • AFF-A800
  • Internal shelf

Issue

During resillience testing following is observed when performing switchback
 

Cluster_A (manual recovery required): Some disks were left behind during switchback. They are listed along with a reason for failure: 2.11.15 (no error)
If any of these disks are failed, replace them. Otherwise use the "metrocluster switchback" command again to return the disks to their original owner. Use the "storage disk show -dr-home-id !- -fields dr-home, container-type, aggregate" command for more details on the status of the left-behind disks.
 
The internal disk is missing path from partner node node_A_2
The missing path is not reported when running following command
 
Cluster_A::> storage disk show -disk 2.11.15
                  Disk: 2.11.15
        Container Type: shared
            Owner/Home: node_A_1 / node_A_1
    
Paths:
                                LUN  Initiator Side       
Controller         Initiator     ID  Switch Port          
------------------ ---------  -----  --------------------
node_A_1           0n            17  N/A                  
---------

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support