- Fabric attached
- Unmirrored aggregates
Using unmirrored aggregates in fabric attached MetroCluster system, all disks from this aggregate should be local to the node owning the aggregate but attached through the fabric and visible to all nodes in the MetroCluster.
Verify which disks are not local to the system by executing the 'disk show -aggregate <aggregate> -fields is-local-attach' command.
siteA::> disk show -aggregate <aggregate> -fields is-local-attach
3 entries were displayed.
Verify if the aggregate is intended to be mirrored and mirror it.
Note: There are several different options for addressing this issue which might require careful analysis of your system.
Reach out to your account team or NetApp Support for information on how to address this configuration.
Add your text here.